Why do Scuba Divers Fall Backwards into the Water?

Why do Scuba Divers Fall Backwards into the Water?

If you’re not a professional or recreational diver, you may have wondered why they dive backwards rather than just stepping into the water or doing a headfirst dive or a belly flop like you do off of a diving board. While it may seem strange to those unfamiliar with diving, there are actually a few reasons why this is done.

While you might have seen scuba divers fall backwards, there are other entry methods as well. The back-roll entry is just one of the entry techniques.

If you’re not familiar with this or other entry techniques, don’t worry, we’ll get you up to speed. It’s all part of the diving experience.

Entry techniques.

While you’ve seen the backwards fall, there are also several other entry techniques that divers use. These include the giant stride, side-roll and back fin entries. All of these methods involve a controlled descent into the water, usually facedown in some form or another.

While other divers may want to try some of those techniques, we’re just going to focus on the two most common techniques and that is the backward roll and giant stride since both are great methods whether you’re on a larger boat or a smaller boat.

The backward roll entry.

One of the most common scuba diving entries is the back-roll entry. This involves the diver standing at the edge of a boat or dock and falling backward into the water with their fins pointed up and arms crossed over their chest.

The main reason for this method is that it allows divers to get in quickly, safely, and with minimal effort. After all, the heavy scuba gear will take its toll on your body after you have been scuba diving long enough.

Another reason scuba divers dive backwards is that it allows them to keep their diving gear and other loose gear from falling off. If they fell forward, there’s a good chance their mask strap could come off when they hit the water.

There you have it, that’s the backward roll is the most common type of seated entry.

However, there’s another type of entry you may have seen, and that’s the giant stride entry.

The giant stride entry.

Giant Step Scuba Diving Entry Technique

Keeping their scuba equipment on is not the only reason why scuba divers use the giant stride entry.

The giant stride entry involves the divers standing at the edge of a dive boat or dock and taking a big step into the water with their arms outstretched for balance. For this feet-first dive, they usually step just a few feet from the side of the boat or any other stable platform.

This allows them to enter the water gracefully, which can be important if you’re diving with a group.

Plus, the giant stride allows divers to enter the water quickly and efficiently, which is helpful in emergency situations when speed is of the essence.

Finally, this giant step can help conserve the scuba divers’ energy as well. By taking a big step into the water instead of jumping or doing a backward roll, you use less energy and can conserve your strength for the dive.

What’s the best diving entry technique?

Each of these techniques is used based on the situation. Some may prefer diving backwards while others prefer stepping off the side of the boat.

In either entry, scuba divers keep their left hand on their mask and regulator to keep it from falling off when they hit the water. The last thing divers want to have to happen is to lose their air supply in the middle of a dive.

All of these entry methods are designed to help divers enter the water safely and efficiently, so they can get on with their dives without any problems or hiccups. These and other techniques help the diver avoid life-threatening injuries as they enter the water.

Where can you scuba dive from?

Whether falling backwards into the water or taking a giant stride, scuba divers can dive from just about anywhere. From the shoreline to a dive boat or even directly off of a dock – there are plenty of places you can enter the water and start your next underwater adventure!

The safest way to entry, regardless if it’s a backward roll or another seated entry, is to do so from a stable platform. This could be from smaller boats, rigid inflatable boats, or even larger boats. Of course, you’ll want to minimize the rocking motion to avoid hitting the edge of the boat.

If it is a crowded boat and there is a bit of a rock to a small boat, then the backwards roll will probably be your preferred method.

Now you know why scuba divers dive backward.

You’ve seen it on TV or maybe even watched someone else scuba dive, but now you know the reasons why scuba divers dive backwards. Whether it’s for safety, efficiency, or just practicality, scuba divers have their reasons.

So next time you see a diver fall backward by taking the plunge into the deep blue sea with a backward roll, remember what you’ve learned here and appreciate their technique. They’re just trying to keep their scuba gear on by diving backwards.

Always use safe scuba diving practices.

As always, whenever you plan on going scuba diving, make sure that you adhere to all the necessary safety protocols. Make sure you double-check that you have the right equipment and training before getting in the water and follow all instructions given by your dive instructor. That way, not only will you be able to enjoy a safe and enjoyable dive experience but also appreciate why scuba divers take the plunge backwards.